80A~250A ccs2 DC charging socket technical specifications (IEC62196)

  • 2023-03-08 15:53:51
  • Author:Saichuan Electronics

The Sailtran SCZ series CCS2 charging socket is installed on an electric vehicle. By cooperating with DC charging guns, the DC charging function is achieved. The product meets IEC 62196.3-2022, which meets ROHS requirements.

ccs2 DC charging socket Parameters

ModelExample: SCZ-200A-1000V-EU
Rated current

DC: 80A/125A/150A/200A/250A

AC: 32A three-phase

Wire Diameter16mm²/25mm²/35mm²/50mm²/70mm²/95mm²
Rated voltageDC + \ DC- \ PE hole 1000V, the remaining 30V
Withstand voltage3000V AC / 1min. (DC + \ DC- \ PE)
Insulation resistance≥ 100mΩ 1000V DC (DC + / DC- / PE)
Mechanical life10,000 times
Ambient temperature-30℃~50℃
Degree of ProtectionIP55(When not mated)   IP44(After mated)
Contact parts
Materialcopper alloy
Surface treatmentsilver plated
Insulation parts
Materialsilicone rubber
Color red / gray / blue

The electronic lock is driven by a motor, and the micro -switch is used as the position signal feedback device. It is connected to the external control circuit through PIN1, PIN2, PIN3, and PIN4 to achieve electronic locking, unlocking and signal feedback.

Products you may need
Copyright © Yutong Bus Co., Ltd. All Rights Reserved.


Home Products WhatsApp Chat Email